Swing Door Operator

The Swing Door Operator is an electromagnetic system, with wind stop, push and go, and stepping functions.

Application

Suitable for intense traffic, hospitals, supermarkets, offices and airports.

Technical Specifications

• Power Supply - 230V AC / 50MHz
• IP Rating - IP22
• Slip Clutch on AR/E-DO9500 only
• Volt Free Contacts
• Opening time - 0-20 seconds or step by step
• Adjustable opening and closing speed
• On power failure the AR/E-DO9000 unit has spring return
• On power failure the AR/E-DO9500 unit has battery back up

Features

• Low energy unit
• Regulation of all opening and closing speeds
• Push & Go function
• Semi - automatic, (manual until triggered)
• Regulators for all acceleration and deceleration
• Safety sensor inhibiting distance in opening mode
• Pushing thrust limitation

Important Information

All installation must comply with BS7036 it is strongly advised to install:

1. Safety Presence Detectors to prevent the door coming into contact with pedestrians or other objects.
2. Door Loop to carry the cable between the Presence Detectors and Door Operator Unit.
3. Fingershield installed to the hinge side of the door to reduce the risk of finger entrapment.
4. Door Sign “Caution Automatic Door”